Electrical Brass 3-way Ball Valve

Electrical Brass 3-way ball valve is a kind of high-quality valve that combines the advanced technology of China and Japan. It is mainly used for piping systems that require precise flow control and shutoff, such as oil fields, refineries, chemical plants, power stations, and water supply and drainage engineering. The valve has the characteristics of convenient operation, small size, light weight, low consumption, and environmental protection. It can replace the imported valve and be widely used in the national economy and daily life.

1. Heavy-duty with delicate appearance.
2. Excellent seals performance.
3. Various control way, 4G 1 RS485 1 TUYA WIFI
4. 4 types valve body material UPVC, CPVC, PPH, PVDF
5. Normal on-off and modulating are both available

Actuator Features
● ABS+PC housing material,
● Rated torque 30N.M.
● Adopt high performance brush motor overallactuator could be used 20,000 times.
● Additional Function: Failsafel alarm signal output Remotely Control

● Materials
The Remotely Control Motorized T Port 3 Way Valve is constructed with high-quality materials, ensuring durability and longevity. The body is made of UPVC (Unplasticized Polyvinyl Chloride), a lightweight and corrosion-resistant material that resists damage from moisture, acids, and other corrosive substances. The seal O-ring is made of either EPDM or FPM (Flexible Permanent Seal Material), ensuring a tight seal and preventing leakage.

● End Connections
The valve has a range of end connection options to allow for easy attachment to various types of piping systems. The size is DN50-2" (Diameter 50 to 2 inches), providing a broad range of adaptability. Connection types include female threaded, male thread, barb, and spigots, allowing for simple and secure attachment to a variety of piping standards including ANSI/DIN/JIS/NPT/BSPT.

● Temperature and Pressure
The valve is designed for a wide range of temperature and pressure conditions, making it suitable for a variety of applications. The maximum temperature rating is 0℃-55℃ (32°F to 130°F), while the maximum pressure rating is <1.0Mpa (145 PSI).

● Motorized actuator
The valve is equipped with a motorized actuator for remote control and ease of operation. It can rotate the valve stem in 90° increments, completing a full turn in just 30 seconds. The actuator requires a low-voltage power supply of either 24VDC/12VDC/220VAC/24VAC, making it suitable for a range of power sources.

● Control way
The actuator can be controlled remotely via RS485, 4G, or WIFI interfaces, allowing for seamless integration into existing systems or remote locations. This feature also permits remote monitoring and control of the valve position and status.

● Rotation angle
The valve stem can rotate through a full 90° or 180°, allowing for precise control of the flow direction and volume through the valve. This flexibility makes the valve particularly useful in applications where precise regulation of flow is critical.

● Signal output
The valve is equipped with a signal output that can generate either a 4-20mA current or a 0-5V or 5-10V voltage signal. This signal can be used to indicate the position of the valve stem or to trigger additional equipment based on the valve position.

Fault cause
* Power not connected
Due to various reasons, such as power grid failure, the power supply wire may be disconnected, resulting in the motor not receiving power supply and unable to work normally.
* Voltage below level or incorrect
The voltage is too low or the power frequency is incorrect, resulting in the motor not working normally.
* Terminal loose or poor contact
Due to aging or frequent use, the connection between the motor and the power supply wire may become loose or poor, resulting in the motor not receiving normal power supply and affecting its normal operation.
* Over temperature protection of motor
When the temperature of the motor rises to a certain extent, the temperature protection device will automatically cut off the power of the motor to protect the motor from damage.

Processing Methods
* Connect power
Check whether the power grid is normal and whether the power wire is disconnected. If there is a problem, please connect it in time to ensure that the motor receives normal power supply.
* Check whether voltage is within the normal range
Check whether the voltage is within the normal range (220V/380V) and whether the frequency is correct. If there is a problem, please adjust it in time to ensure that the motor works normally.
* Check and correctly connect terminal
Check whether there is loosening or poor contact between the motor and the power supply wire, and tighten or repair it in time to ensure good contact and normal power supply.
* Check whether valve gets stuck or torque value is too big
Check whether the valve is stuck or the torque value is too large, adjust or replace it in time to ensure normal operation of the motor.

How Does an Electric 3-Way Ball Valve Work?

A 3-way motorized ball valve is operated by an electric actuator that rotates the ball inside the valve to control the flow of fluid and gas. The ball has a hole drilled into it that allows media to flow through it. The ball is positioned within the valve body and held in place by two seats. A seal is installed against the ball to prevent leakage.

When the ball is rotated to a certain position, it aligns with the flow path, allowing the fluid to pass through. Rotating the ball to a different position will then block the flow path, preventing the fluid from passing through.

By using an electric actuator to control the position of the ball, the flow of fluid can be easily and accurately controlled. The actuator is typically controlled by a controller or a control system, which can be programmed to open or close the valve on demand, at specific times, or in response to certain conditions.

What Are 3-way Valves Used For?

The versatility of 3-way ball valves lends them the ability to better control flow in more complex situations than a typical 2-way valve. Common uses for this type of valve include:

• Cutting off or shutting off flow.
• Blocking flow in one direction while continuing flow in another direction.
• Combining or mixing flow from two different locations.
• Diverting flow from one location to another.
• Dividing liquid from a single location into two outgoing locations.
• Alternating flow between two outgoing locations.

Qinhuangdao JeveTec Co., Ltd is a young and dynamic company that mainly provides electric actuators, pneumatic actuators, ball valve, butterfly valve, gate valve, check valve and other series products and control unit of IOT that exactly suit our customer's needs. These valves are widely used in water treatment systems, home automation, HVAC system, smart irrigation system, wildfire emergency sprinkler system, recreational vehicle (RV), trailer home, sprinkler truck, fire truck, air compressor, washing machine, and other areas wherever automatic remote fluid control is needed. Based on our experienced expert team from Hebei Normal University of Science and Technology, we offer solutions to ensure that your control system is exactly fit for your use.

Our Electrical Brass 3-way ball valve is a kind of high-quality and efficient valve that is widely used in various piping systems for the connection and isolation of fluids. It is made of high-quality brass material, which ensures its good corrosion resistance and long service life. The ball valve has a simple structure and easy operation, with low flow resistance and good sealing performance. It can be used for various fluids, such as water, oil, gas and other media. Welcome to contact us! We will provide you with the best products and services!

Hot Tags: electrical brass 3-way ball valve, China electrical brass 3-way ball valve manufacturers, suppliers, factory, Sintered Stone Worktops, Steel Ocean Light Buoy, Fire Sprinkler Flexible Drop Hose, Flange For Oil Gas Pipeline, 21 5 mm Toughened Laminated Glass, Metal Bellows Expansion Joint