Impact Resistance Of Glass Testing Equipment

Impact resistance glass testing equipment is specialized equipment used to evaluate the impact resistance of tempered and laminated glass, suitable for the architectural, security, and automotive glass industries.

Sample size: 1900mm × 1500mm × 3570mm

Sample size: 1930mm × 864mm

Lifting method: Electric

Release method: Automatic

Maximum impact height: 1200mm (customizable)

Rubber gasket width: 15mm

Rubber gasket thickness: 3mm

Rubber gasket hardness: Shore A50

1) Adjust the measurement value and set the maximum tracking value. Adjust the support block span as needed.

2) Adjust the probe position, ensuring it extends 2mm-3mm beyond the three support pins.

3) Gently place the probe against the glass surface, ensuring all three support pins are in contact with the glass.

4) Slide the measurement position and read the data.

High-Strength Structure
The frame of the impact resistance glass testing equipment is welded from Q235 carbon steel and spray-coated with a plastic-sprayed finish. It boasts an impact strength of up to 350 MPa and resists deformation over long periods of use.

Precise Control
The electric lifting system with an automatic release mechanism ensures a lifting height error of ≤1mm, ensuring a consistent impact point.

High Wear Resistance
Key components, such as the impact guide rail, are constructed from Cr12MoV alloy steel. After heat treatment, the hardness reaches HRC58, extending the wear life by three times that of ordinary materials.

High-Quality Shock Absorption System
The bottom is equipped with rubber shock-absorbing pads and a 15mm wide, 3mm thick rubber gasket to effectively absorb impact energy and reduce equipment vibration.

Easy Operation
The touch-sensitive interface allows for one-touch lifting and releasing, with automatic data recording. Each operation takes just 10 seconds.

Safety Design
The impact resistance glass testing equipment is equipped with a transparent explosion-proof protective cover and an emergency stop system to ensure operator safety.

1) Test three test specimens measuring 300mm x 300mm, fabricated using the same method as the impact test specimens and of similar thickness.

2) These test specimens may be cut from production samples of the same size and thickness as those submitted for impact testing.

3) For heat-tempered or tempered laminated glass, the test specimens may be cut from a similar sheet of annealed laminated glass.

● Immerse the sample edge-on in a water bath at 66°C ± 3°C for 3 minutes.

● Quickly transfer the sample to a water bath maintained at boiling point.

● Immerse the sample edge-on in a water bath at 66°C ± 3°C for 2 hours.

● Remove the sample and inspect for bubbles and other defects.

The main products of Qinhuangdao Yuanchen Technology Equipment Co., Ltd. are safety glass testing equipment, as well as the development, design and processing of non-standard sheet metal stamping parts.

Q: What is the main purpose of this equipment?
A: It is used to evaluate the breakage resistance of tempered and laminated glass under impact at different heights to ensure that the materials meet safety standards.

Q: Is the equipment customizable?
A: Yes. The structure can be customized to suit different glass thicknesses, sizes, and impact energies.

Q: Is the impact resistance glass testing equipment easy to install?
A: Yes. The modular design allows users to simply assemble the fixing bolts and use it without any secondary adjustments.

Q: Can it be used for laminated glass?
A: Yes. The equipment supports a variety of sample types, including tempered, laminated, and safety glass.

Q: How is maintenance performed?
A: Regular lubrication of the guide rails and inspection of the electric lift system are sufficient. Maintenance is simple and quick.

Hot Tags: impact resistance of glass testing equipment, China impact resistance of glass testing equipment manufacturers, suppliers, factory, Steel Ocean Light Buoy, Sintered Stone Worktops, Fire Sprinkler Flexible Drop Hose, Flexible Metal Corner Tape, Fibreglass Car Body Shell, Metal Bellows Expansion Joint