The workmanship is based on military tent standards (solid materials).
The top fabric is three-proof cloth, the gable and wall fabric is thickened cotton canvas, the middle uses thickened felt, and the inner lining is white cloth.
The doors and windows (screen windows) have a large opening area, and have moisture-proof, dust-proof, and ventilation functions (warm in winter and cool in summer).
The support rod is a welded 3cmX3cm square tube, using high oxygen welding method, with rust prevention treatment (strong and durable).
The tent adopts a steel frame structure with a reasonable structure (the product comes with an installation manual that is easy to understand).
The standard tent is 1.5 meters high, and the special tent is 1.8 meters high (with bunk beds).
How to build a military tent?
The frame structure of military tents and disaster relief tents is different.Therefore, when setting up tents, it is important to first read the instructions for use.The frame of disaster relief tents generally uses three-way, four-way, and other connection heads and straight pipes for insertion.
Steps to build a military tent:
1. Open the canopy packaging bag and frame packaging bag, remove the product packaging list and count the number of components;
2. Take out 8 universal rods and three sets of end frame three-way and middle frame four-way that have been pressed and fixed with steel wire ropes, and arrange them in three groups in a herringbone shape and connect them;
3. Take 4 universal rods and end frame three-way, middle frame four-way to form a frame;
4. Place the entire cotton liner on the three sets of herringbone frames, adjust the position so that the cotton liner roof aligns with the middle rod of the herringbone frames;
5. Place the outer roof cover on the outside of the three sets of herringbone frame cotton liners and adjust the position;
6. Take 6 upright poles and insert them into the end frame three-way and the middle frame four-way, and use 6 people to simultaneously raise the canopy, which is connected to the already placed ground pole and end pole components;
7. Adhere the side wall of the cotton liner to the gable wall of the cotton liner with nylon fasteners, and adjust the position;
8. Tie the strapping at the vertical poles of the single canopy body through the copper canopy ring of the cotton liner and tie it to each vertical pole;
9. Tie up the straps of each part, fasten the nylon zippers, adjust the position of the tent, and connect it with the frame members;
10. Glue the side walls and gable walls of the floor-paved tent liner with nylon fasteners;
11. Drill triangular piles at corresponding positions on the ground, fix the tension rope, adjust the tightness, and cover the rubber pile head on the end face of the triangular pile;
12. Settle the tent and build up the soil around it.